If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
Another unit off the shelf that has never been in service. I have powered up and everything appears to working fine. The case is in very good condition as it has been stored in a box (but not the original) Also note I do not have the rack mounting kit that would have originally come with this unit or the instructions.
I would prefer collection as this a heavy unit (10Kg), however I am happy to ship at cost at the buyer own risk.
From the makers website
ADASTRA PA512ORD MIXER AMPLIFIER The Adastra A120 is a four channel mixer amplifier suitable for a wide range of paging and background music applications such as in schools, shops, hotels, shopping centres, theatres, sports and health clubs, churches and commercial offices. It is built to high standards and housed in a 2U rack mounting chassis, easily integrating with most other professional audio visual installation hardware. The mixer section offers four separate channels with input 1 being a balanced microphone input presented on an XLR connector and barrier strip. Input 2 is a second unbalanced microphone input presented on a ” jack, input 3 is a third unbalanced microphone input presented on a ” jack which can also be switched for line input sensitivity and input 4 is a summed stereo line input presented on a pair of phono connectors. Each input has an associated rotary level control on the front panel, along with the master volume control and master bass and treble controls. Other useful features include a switchable voice priority over-ride on input 1, a stereo line level output and a mono line level slave output both presented on phono connectors, and a front panel mounted power switch with LED indicators for power, signal level and signal clipping. The power amplifier section is rated at 120W mono and loudspeaker outputs for both 8 low impedance and 100V line are available, presented on a screw terminal barrier strip. Mains power is applied via a standard 3 pole IEC connector, but a useful 24V DC powering option has been provided to enable this amplifier to be used in vehicles for mobile outdoor applications, with connection being made via a screw terminal barrier strip, presented on the rear panel, next to the loudspeaker outputs. General signal to noise ratio 92dB THD+N <2% @ 1kHz mic input connector ” Jack and XLR mic input level 1.5mV (-56.4dBV) mic input impedance 5k line input connector phono line input level 300mV (-10.4dBV) line input impedance 10k line output connector phono line output level 1V line output impedance 600 speaker output connector screw terminal speaker output impedance 8 speaker output impedance 100V 83 output power RMS 120W output power max 160W 10% THD power requirements 300W battery requirements 24V DC 8A dimensions 425mm W x 230mm D x 88mm H
weight 10kg
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.