If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
Pro-Acoustic Audio Foam (AF) Professional acoustic foam products ideal for Pro and Home Recording Studios
AFHS2 Acoustic Foam Home Studio Kit ( 24 Acoustic Foam Tiles & 4 Bass Traps ) 24x AFW305 Acoustic Foam Wedge Tiles 305 x 305 x 45mm (24 tile pack covers 24ft2 or 2.23 M2 ) 4x BASSBLOCK Compact Bass Traps, 1ft Tall Bass Traps
The CNC computerized profile machines used to manufacture our tiles long since replaced the old eggbox roller foam convoluters, and you will now find that all the professional tiles as made by the high end acoustic foam specialists are now CNC cut on computerized foam cutting machines as it gives a much neater finish and far better aesthetics to your studio. each tile will match up with one another unlike cheap eggbox tiles where the edges never match up and don’t be fooled on density a higher density doesn’t make a tile better. look at the table below where our AFW305 tile beats a std 30 kilo acoustic foam eggbox tile on every frequency. Noise Reduction Coefficient NRC Test Data Similar Items AFP305 Pyramid 24 Tile Pack – Free Postage 32.99 Similar Items BLOCK45 Tile 24 Tile Pack – NRC 0.7 (70%) 39.99 Frequency (Hz) Competitors Convoluted “eggbox” Tile 30KGm3 AFW305 Wedge Tile 25KGm3 AFW305 is better by 1250.09 0.1011.1 % 2500.28 0.293.6 % 5000.48 0.504.2 % 10000.65 0.684.6 % 20000.66 0.7412.1 % 40000.79 0.9824.1 % The comparison above shows how against a standard convoluted “eggbox” tile even using a 30kg m3 acoustic foam our AFW305 tile wins hands down on every audible frequency and shows it to have a staggering 9.9% better noise absorption coefficient overall. So don’t believe the Hype that a denser foam makes a better acoustic foam, The NRC test data is what you need to compare .For Full Independent Test Report ( Click Here )Supplied Factory Direct – From The UK’s Largest Pro Acoustic Foam Manufacturer
Get the Right Sound
Our cnc machines produce a perfectly accurate wedge profile this combined with the best polyether acoustic foam grade will maximize the sound absorption and dispersion allowing for far superior sound results. All manufactured in our state of the art 57,000 ft factory in Oldham Greater Manchester !Made from a high-grade 25Kg/M3 open cell specialist acoustic foam these Pro acoustic foam tiles are precisely profile cut like no other tiles in this price range. Why are we so cheap? As the manufacturer we make our margins by selling large volumes and selling direct. we cut out the middlemen and re-sellers as its these on costs which hype up acoustic foam prices.Having tested many specialist acoustic foams right up to a 42 KG/M3 density, we have found this particular 25KG/M3 grade to be the best for its wide range of sound absorption properties as it has the right combination of density porosity hardness controlled permeability and open cell structure, which allow the foam to give the optimum in acoustic performance. It is also a dark grey studio friendly colour which deals with light degradation much better than most others. Not all acoustic tiles are equal so see and hear the difference that pro-acoustic tiles can make.As soon as you try these pro acoustic tiles you will realise why they are in a league all of their own when compared to other acoustic tiles sold in the same price bracket. Unlike many acoustic tiles sold on the pro acoustic range is tried and tested, the range is now in its 9th year and we have supplied thousands of these tiles into both professional and home recording studios. Having supplied our acoustic foam products into many well known professional studios, film sets and MTV to mention just a few.These tiles effectively absorp any high frequency sound waves incident applied on them by presenting several deflection surfaces resulting in a livelier sound. Further more the increased depth of the valleys will help to trap air within them forming resonant chambers and broadening the spectrum of absorption in the medium frequency range. Medium to high frequency sound waves won’t stand a chance! Try for yourself and hear the difference that our pro-acoustic tiles deliver !Acoustic FoamWill Help You With The followingReflection Both primary & secondary Improve vocal clarity
Flutter echoes ReverberationModal issuesStanding waves Mid to High Bassblock Bass Traps : Get the Right Sound The Thicker foam gives more absorption below 500 Hz. For this reason bass traps are an essential part of any studio Bass Traps work by trapping the random omni-directional bass energy that tends to cluster in corners and overwhelm the room. They have the positive effect of reducing smear and giving bass more definition and punch allowing you to control low frequency energy. and helping your studio to attain a tighter, more controlled bass. By installing bass traps in a room you will immediately reduce the low frequency build up which can occur and will then make controlling your sound much easier, by tightening up the sound and giving you more control over what you hear. The end result of this being that you can make a room which originally sounded terrible into a room which sounds unbelievably better. Lower frequencies are much harder to deal with than high and mid frequencies as they have long wavelengths. This makes them more powerful. In order to deal with this much more than acoustic foam tiles are needed in order to tackle this “the thicker the foam the better it deals with low frequency issues” however placement also plays a large part particularly in the corners of a room which are most prone to low end frequency build up which is why bass traps are so important. The human voice can span a wide range 85 Hz to 1300 Hz with most vocal ranges being between 100 and 800Hz., Therefore absorption attention must be paid below 500 Hz. because that is where the largest percentage of all the vocals will lie around 75%, especially with male vocals. Standard thinner acoustic Traps will make a huge difference but you may be missing some absorption at the bottom half where more a large amount of the energy is An addition to these new traps is a cut out at the back which not only helps with the traps effectiveness, it allows cables to lie behind and it also makes the trap easier to fit on uneven corners. We had the trap tested for its acoustic performance and the results can be seen by downloading this document Independent Test Report ( Click Here ).
Not all acoustic foam is equal so see and hear the difference that pro-acoustic Tiles & Traps can make.
As soon as you try our pro acoustic products you will realise why they are in a league all of their own when compared to other acoustic Traps sold in the same price bracket.Pro Acoustic AFW305 The AW305 Acoustic Foam Treatment Tile perfect for dealing with High to Mid Frequencies size 305 x 305 x 45mm Wedge Tile NRC Data125Hz 0.10
250Hz 0.29
500Hz 0.50
1000Hz 0.68
2000Hz 0.74
4000Hz 0.98
5000Hz 1.10
NRC 0.55 (55%) Foam ProfilesTile Size : 305mm x 305mm x 45mmProfile Shape : V Profile 45mm base to peak Coverage : Pack Covers 24 ft2 or 2.23 M2Polymer type : Open cell polyetherFire Rating : UL94-HF1Colour : Dark greyDensity range :24-26 Kg/M Acoustic absorption properties
0.68 @1000KHz – 0.98 @ 4000KHz
UL94 HF1 Fire rating
One thing you should always look out for is the foams fire retardency. All our foam tiles are made from foam that is certified tested to UL94 HF1 this is a high fire rating the minimum recommended for sound deadening foams. UL 94 HF1 is the most stringent of the UL94 tests.
All our acoustic foam products are rated UL94 HF1 or higher.In addition our foam will also pass the even higher furniture and furnishings fire safety regulations, Schedule 1 Part 1 of Fire Regs and to BS 5852:Part 2:1982 Suggested Uses Mixing Rooms and Studios
This pack is made in order to supply you with an out of the box solution to treating the your studio. In order to treat early reflections you will need to apply 2 vertical 2x 3 panels on the left and right wall sides from your mixing position between you and the speakers. And also a horizontal 2×3 panel on the wall behind you and the mixing console . Then a horizontal 2x 3 panel above your mixing position “the cloud” aligned to the two side vertical panels. That’s it, now hear the difference the tiles make.
Recording booth
In a recording booth you need to deaden the sound as much as you can start by lining the walls from the waist up. If you have additional foam then cover as much of the booth as you can. Vocals will very rarely reach low frequencies therefore you will not have problems with low frequency and lower frequency treatment such as bass traps will not be needed.
Sound Absorption .
Open cell foam is proven to show good sound absorption characteristics, particularly with the medium to high end of the frequency spectrum. The profile cut structure of these foam tiles and optimally designed profile exhibits a dual action on any incident sound waves. Firstly the sound waves upon hitting the peaks and valleys of the foam panels will get deflected in several directions which will weaken them, Secondly sound waves that penetrate the foam will get absorbed in the cell structure. This double action means that you almost totally eliminate echoes from the top end of the frequency spectrum.
To absorp lower frequency of absorption with foam there is only one answer “THICKER TILES” the thicker tile the more the tile will deal with lower frequencies! Very low frequencies are hard to eliminate and would require gigantic blocks of foam to completely absorb the sound incident applied on them, however with the correct combination of positioning, foam pads and acoustic panels you can reduce lower frequency distortion. Our company is IS09001 accredited and also holds the Investors in People standard, The Comfortex acoustic foam division was started in 2004 since then we have supplied acoustic foam tiles and bass traps to hundreds of recording studios and thousands of individuals, as well as having our foam featured on MTV. Other Acoustic foam Products From Comfortex Acoustics, Visit Our Ebay shop to see moreAFW45 Wedge Tile AFP45 Pyramid Tile AFW100 Wedge Tile AFP100 Pyramid Tile AFBT02 Bass Trap AFBTX Bass Trap
We are located near the centre of Oldham on Rochdale Road next to Paul Price Motors.Comfortex Ltd
Anchor Works
Rochdale Road
Oldham
Lancs
OL1 2HPTel : 0845 600 9041 Wednesday to Friday 10.30 to 4.30 and please ask to be put throught to acoustic foam sales.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.