CROWN XLS 1000

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
CROWN XLS 1000

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.

 CROWN XLS 1000 AMP FOR SALE….SUPERB CONDITION…USED IN WORKSHOP FOR TESTING SPEAKERS AND RIGS

NO ORIG BOX BUT WILL BE PACKAGED SECURELY

SECURITY MARKED AND TESTED AND WORKING

Stereo, 2 ohms (per ch.): 550WStereo, 4 ohms (per ch.): 350WStereo, 8 ohms (per ch.): 215WBridge-Mono, 8 ohms: 700WBridge-Mono, 4 ohms : 1100WSensitivity (for full rated power at 4 ohms)1.4 Vrms
Frequency Response (at 1 watt, 20 Hz – 20 kHz)+0dB, -1dB
Signal-to-Noise RatioRated as dBr to full rated 8 ohm power output (A-Weighted):
XLS1000 > 97 dB
XLS1500, XLS2000, XLS2500 > 103dB
Damping Factor (8 ohm): 10 Hz to 400 Hz> 200
Crosstalk (below rated 8 power)At 1 kHz: > 85dB
At 20kHz: > 55dB
Input Impedance (nominal)20 kilohms balanced,
10 kilohms unbalanced
Load Impedance2 to 8 ohms per channel in Stereo
4 to 8 ohms in Bridge Mono
AC Line Voltage and Frequency Configurations 
Available ( 10%)120 VAC 60 Hz
100 VAC 50/60 Hz
220 and 240 VAC 50 Hz
VentilationFlow-through ventilation from front to back
CoolingInternal heat sinks with forced-air cooling for rapid, uniform heat dissipation
Air Volume Requirements (per minute per unit)80.15 ft3 (2.27 m3)
Integrated ProcessingPureBandTM Crossover System
Crossover Filter: Linkwitz-Riley 24dB per Octave
Crossover Frequency Range: 50 Hz – 3 kHz
Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).
PeakxTM limiters: Channels independent clip limiter designed to provide maximum output while protecting your loudspeakers

Input/Output
Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to ditribute signal to additional amplifiers.
Output Connectors: Two 4-Pole Speakon Output Connectors accept 2-pole or 4-pole Speakon connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two wpeakers to a single Spekon connector.

ConstructionXLS1000/XLS1500: 8.12-Inch (20.62cm) depth
XLS2000/XLS2500: 10.35-Inch (26.29cm) depth
DimensionsEIA Standard 19-Inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-Inch (8.9-cm) height. XLS 1000/1500: 7.7-Inch (19.6-cm) depth. XLS 2000/2500: 10.7-inch (27.2-cm) depth.

Net Weight, Shipping WeightXLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.