If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
THESE ARE STILL GOING FOR 500 + VAT EX RENTAL ONES
ALL WORKING.Good conditionThe E-PAC Power amplifier controller is a single channel amplifier with an internal controller for operating the d&b full range systems.All operational states of the E-PAC as well as the pre- programmed system settings and configurations for the d&b loudspeakers systems are controlled with a front panel digital rotary encoder in conjunction with the Liquid Crystal Display (LCD).The E-PAC has an additional linear configuration.The E-PAC is specifically designed for high impedance loads (200 W into 16 ohms, 300 W into 8 ohms).If low impedance (LO IMP) mode is selected the E-PAC can drive up to two 8 ohm or four 16 ohm loudspeakers, at reduced output (6 dB). This is useful for situations such as front fill or under balcony use where multiple loudspeakers are needed but maximum output is not required.All the functions of the E-PAC, including programmable internal delay settings, can be remotely interrogated and altered via the RIB, Remote Interface Bridge and a PC
People with less than 10 feedback will be discarded unless they contact me first.
This unit is being advertised in other places
Relisted due to time wasters.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.