If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
This listing is for ONE PAIR X EV SX300E Speakers, ONE PAIR X EV SB122 Subs and ONE X EV XP200A System Controller (USED)
SX300EThis is probably one of EV electro voices most legendary passive speakers , it’s just one of those items that just works , great sound at a price that will not break the bank . The SX 300 is as plastic moulded speaker cab that produces a great sound and is small enough to use for mobile PA and with its angled design it can be laid on its side and used as a stage wedge monitor as well .Axial Sensitivity (SPL, 1 W @ 1 m)99 dBChassis Size304.8 mm (12″)Colour BlackDirectivity Index11.1 dB +2.4/-4.1 dBInput Connections2 four-pin SpeakonSpeaker TypeFullrange, Mid-High, Two-WayFrequency Response (-10 dB)50 – 20000 HzInternal CrossoverYesSensitivity 1 W/1 m99 dBMax. SPL/1m (calc)131/123 dB Low Z/100VCoverage (Nominal -6 dB) H65 Const.-dir. hornCoverage (Nominal -6 dB) V65 Const.-dir. hornSystem Power Handling (Continuous/Program/Peak)300/1200 Watts Long-Term/Short-TermLF Transducer12-inch DL12BFHHF Transducer1.25-inch DH3/2010ACrossover Frequency1500 HzNominal Impedance (Passive)8 ?Minimum Impedance5 ?FlyingYesOutdoorNoHeight586 mm (23.07″)Width429 mm (16.89″)Depth312 mm (12.28″)Weight Net14.5 kg (31.97 lbs)
12″ PASSIVE SUBWOOFERVery Compact and Lightweight — Only 33 lbs/15.0 kgIntegral handle400 Watt continuous, 1,600 Watt peak power handlingParallel Neutrik Speakon high current input connectorsCast frame EVS12SB 12-inch high excursion subwoofer driverIntegral low-pass filter — No additional amplifier or processor neededThe Electro-Voice Sb122 bass module is a very compact, lightweight subwoofer system that is designed to add bass enhancement to EV Sx and Zx Series speaker systems. The Sb122 combines the advantages of a long-throw 12″ woofer with a strong, lightweight composite enclosure. The large vent provides less vent compression and turbulence for increased low frequency output. The EVS12SB cast frame transducer created for the Sb122 uses the same motor and suspension design as the EVS18S used in EVs larger systems. With nearly two inches of peak-to-peak excursion capability, this is literally a twelve inch with the heart of an eighteen. An integral low-pass filter allows the Sb122 to be directly connected in parallel with a full-range speaker for truly impressive low-end output without the need for an additional amplifier and processor. The filter is transparent below 160Hz, allowing the Sb122 to be used as an independent subwoofer in biamp applications without the need to disable the internal filter. For maximum output in biamp applications and protection of the full-range system when running in parallel, a 40Hz Hi-pass (subsonic) filter is recommended. The Sb122 features a convenient pole mount socket on top of the enclosure to allow a small full-range speaker such as the Zx1 or Sx80 to be mounted on the optional ASP-1 accessory pole, resulting in a compact system than sounds much bigger than it looks.
XP200Ahis item can be used with the Electro Voice SX series speakers to give a nicer sound and better use of the LF range
from the LF driver. It links together and enhances the performance of
one or more stereo pairs of the Sx 200 full-range speaker system
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.