If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
This is a fabulous old Futurelight Scanner great effects and great colours. The bright 250 MSD bulb work brilliantly giving vivid retro lighting effects
Product Name: Futurelight CF-200 Scanner
Product Model: CF-200
Manufacturer: FUTURELIGHT Futurelight CF-200 ScannerInnovative lighting effect with colour and gobo-wheel
11 different, dichroic colour-filtres and white
Rainbow-effect with adjustable speed in both directions
Gobo-wheel with 14 static gobos, open and blackout
Strobe-effect with adjustable speed (1-9 flashes/sec.) via gobo-wheel
DMX-controlled operation or stand alone operation with Master/Slave-function (1 slave)
Sound-controlled via built-in microphone
Fuzzy-Sound-Control: program continues automatically during periods without music or bass-beat
Control-Board with 4-digit display
For MSD/HSD 250, MSD 250/2 or MSD/HSD 200 lamp
DMX-control via every standard DMX-controllerPower supply: 230 V AC, 50 Hz ~
Power consumption: 440 W
DMX-control-channels: 4
DMX-512-connection: 3-pin XLR
Sound-control: via built-in microphone
Flash-rate: 9 Hz
Number of colours: 11 dichroic + white
Number of gobos: 14 static gobos and open
Dimensions (LxWxH): 260 x 380 x 150 mm
Weight: 11 kgMANUALOPERATION
After you connected the effect to the mains, the CF-200 starts running. During the Reset, the motors are
trimmed and the device is ready for use afterwards.
Stand Alone operation
In the Stand Alone mode, the CF-200 can be used without controller. You can do without a controller as the
CF-200 features a built-in microphone, which provides automatic sound control.
Disconnect the CF-200 from the controller and select “Master Mode: Sound-control”.
If you have connected a footswitch to the Blackout-socket, you can lock the light output (Blackout-mode) and
turn it on again.
Master/Slave-operation
Connect the master and slave-devices and adjust the settings as desribed above.
DMX-controlled operation
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. In order to call up the different features, you first have to open the light
output (control channel 4, DMX-value 251-255).
Addressing
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the CF-200 will respond to the controller.
If you set, for example, the address to channel 5, the CF-200 will use the channel 5 to 8 for control.
Please, be sure that you dont have any overlapping channels in order to control each CF-200 correctly and
independently from any other fixture on the DMX data link.
If two, three or more CF-200 are addressed similarly, they will work similarly.
For address setting, press the Mode-button until the display shows “d” and set the desired address via the
Up/Down-buttons.
Controlling:
After having addressed all CF-200, you may now start operating these via your lighting controller.
Downloaded from www.Manualslib.com manuals search engine
26/54 51837540X18NXS_V_1_1.DOC
Note:
After switching on, the CF-200 will automatically detect whether DMX 512 data is received or not. If the data
is received, the control LED flashes. If there is no data received at the DMX-input, the control LED lights up
permanently.
This situation can occur if:
– the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the CF-200.
– the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
Note:
Its necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
DMX-protocol
Control channel 1 – Rotation
DMX-value Feature
0-19 No rotation
20-135 Rotation clockwise
136-139 No rotation
140-255 Rotation anti-clockwise
Control channel 2 – free
Control channel 3 – Colour-wheel
Linear colour change following the movement of the slider. In this way you can stop the colour-wheel in any
position.
DMX-value Feature
0-10 White
11-21 Magenta
22-32 Yellow
33-43 Dark blue
44-54 Light green
55-65 Pink
66-76 Purple blue
77-87 Dark orange
88-98 Pale yellow
99-109 Light blue
110-120 Light orange
121-127 Dark green
128-191 Forwards rainbow effect with increasing speed
192-255 Backwards rainbow effect with increasing speed
Control channel 4 Gobos, Reset, Strobe
DMX-value Feature
0-7 Closed
8-15 Open
16-23 Gobo 1
24-31 Gobo 2
32-39 Gobo 3
40-47 Gobo 4
48-55 Gobo 5
56-63 Gobo 6
64-71 Gobo 7
72-79 Gobo 8
80-87 Gobo 9
88-95 Gobo 10
96-103 Gobo 11
104-111 Gobo 12
112-119 Gobo 13
120-127 Gobo 14
128-132 Closed
133-137 Reset (after 3-5 seconds)
138-159 Forwards gobo-change with increasing speed
160-200 Strobe effect with increasing speed
201-250 Random strobe effect with increasing speed
251-255 Open
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.