If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
Special offer bundle pack of mini innoFADER Plus and RECK. LA black plastic housing for Numark PT01 Portable Turntable.
Now you can easily upgrade your PT01s turntable with the mini innoFADER Plus. This does not void the warranty and the speaker is still nice and loud. The ultimate upgrade for your PT01 turntable.
Included in pack:
1 x Mini innoFADER Plus
1 x Reck LA Fader housing for Numark PT01 Turntable
innoFADER Features:
The mini Innofader Plus is the latest upgrade part which will replace the mini Innofader PNP P. The cut point has 0.1mm precision combined with a lightning fast 1msec response time. You can now also hook it up to an innoJUSTER to ensure you get the hairline precision cut point exactly where you want it on the fly!
The installation process is now greatly simplified. Low profile connectors ensure that you do not have to worry about breaking any cables. The button is now easier to press. And the adjustments now can be done with simpler swipe movements.
The mini innoFADER PNP P version works as a replacement fader for even the tightest of mixers and controller where space is limited. Constructed using the same quality and technology of its bigger brother the mini innoFADER Plus will breathe new life into your mixer or controller and give you years of use. Replace virtually any crossfader imaginable with a mini innoFADER PNP Plus!
The mini innoFADER Plus is compatible with all the existing range of mixers and controllers along with now being plug and play with the Numark PT01S portable turntable.
Be sure to check the compatible mixer fitting guide and manuals on www.innofader.com to choose the correct model.
Features:
Ultra fast 1msec response time
Smooth light weight fader
Precision 0.1mm step cut-in adjustment on both sides
3 standard curves – soft, linear, and sharp
Output reverse
Up to 8mm total height adjustment
Unmatched product life
Non-contact variable capacitor technology
No bleed/crackling
Designed to plug and play with the widest range of mixers and controllers
100% resistant to dust, smoke, temperature and moisture
No cleaning required
Highly polished premium grade stainless steel rails for extra smooth glide
Compatible with the innoJuster
Plug and Play with Numark PT01s
For list of compatible mixers please visit www.innofader.com
Reck LA Fader Housing in Black
The RECK FH is a 3D printed housing designed to mount the Mini Innofader and Mini Innofader Plus on the PT01 Scratch. It can also be used for DIY faders. It’s designed to be mounted in either horizontal or vertical position while allowing the case to be closed. It can use the original hardware from the PT01 Scratch or the included hardware from the Mini Innofader to mount. To reduce the stem height, use the 4mm standoffs that are included with your Mini Innofader. It can be use with or without the standoffs. But the lid will only close with the standoffs installed. Take into consideration that the wiring of the Mini Innofader should go over the opening on the PT01 Scratch.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.