Used, Has some light surface marks due to storage, Comes in original box with manual.
Only selling due to house move, and lack of usage now.
Serious buyers only.
Collection only (due to size/weight & nature of item).
Product DescriptionFront Panel volume control with output meter display and clip indicators5 Way Binding Banana plug and 3 Speakon+ outputsCrossover for subwoofer with 20-200Hz frequency adjust30Hz and 50 Hz low-frequency roll-off filtersInternal Compression limiter with electronic protect for short circuits2x dual speed fans coupled with heat sink cooling1300W RMS at 4 Ohms / 930W RMS at 8 Ohms (Mono Bridged)650W RMS at 2 Ohms / 475W RMS at 4 Ohms (Stereo)300W RMS at 8 Ohms (Stereo)Balanced XLR and 6.3MM inputsBalanced XLR outputs allow multiple amps to share signals
Power Up: output is muted to protect speakers during power-up in case of transients
Input: 10k resistors protect input from overload
Output: Special circuitry remove RF frequency from the output
Thermals: Dual-Speed fans draw air through amplifier over heatsinks for rapid cooling, when temperatures exceed 90c amplifier will mute until sufficiently cooled.
Rated Power Output:
650W RMS @ 2 Ohms, 1KHz, 1% THD per channel (stereo)
475W RMS @ 4 Ohms, 1KHz, 1% THD per channel (stereo)
300W RMS @ 8 Ohms, 1KHz, 1% THD per channel (stereo)
1300W RMS @ 4 Ohms, 1KHz, 1% THD (mono bridged)
930W RMS @ 8 Ohms, 1KHz, 1% THD (mono bridged)
Total Harmonic Distortion: Less than 0.002%
Input sensitivity & Impedance: 1.0 V RMS (0 dBV)
Hum & Noise: 100 dB, unweighted
Power Consumption: 10A @ 120V AC 120V/60Hz or 220V/50Hz switchable
Frequency Response: 10Hz-40kHz, +/-1 dB
Dimensions (H x W x D):
3.5″ x 19″ x 15.9″
880mm x 483mm x 405mm
31 lbs. / 14kg.
The amp has an adjustable low pass filter so can be used as a subwoofer amp, or the filter can be switched off to be used as a full range amp.