If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
A system comprising of 2 NuQ-6s and 1 TBS-110
the system can be run with
a) 2 amps with the sub on one and the 2 full range on the other
or
b) a single amp and using the speaker level crossover built into the back of the sub
the sub has a fantastic sound and ideal for fitting under stages or sitting out front
All speakers have had 6 months running as background music in an event space and then as my office sound system for 3 years (yes I know a bit over the top) so only just run in.There is a slight scuff in the paintwork on the sub but a little paint will make it perfect. The NuQ6s are like new
To note the add says collection only but delivery could be agreed
What TurboSound say about the NuQ-6
The NuQ-6 2-Way 6.5″ Full Range Loudspeaker from Turbosound is a passive full range two-way loudspeaker system designed to be used with Turbosound LMS series digital loudspeaker management systems. NuQ systems can be controlled over a BVNet network using TurboDrive control software.The NuQ-6 consists of a front loaded 6.5″ neodymium LF driver and a 1″ neodymium HF compression driver on a rotatable 90 H x 60 V converging elliptical waveguide, matched with an internal passive crossover network in a reflex-loaded enclosure, giving excellent pattern control and allowing a swap of horizontal and vertical coverage patterns. The trapezoidal enclosure is uniquely formed out of pre-bent plywood, which entirely eliminates four cabinet joints and provides additional benefits of superior strength, low weight and reduced internal reflections. The symmetrical shape creates an additional role as mirrored left/right monitor wedges.
The cabinet includes a steel mesh grille backed with foam backing that is finished in black textured paint and includes rigging points for use with optional flying yokes and wall brackets. The rear panel connector plate carries two Neutrik speakON NL4 connectors for loop in and loop out connections to additional enclosures.
2-way full range loudspeaker for portable PA applications
200 W continuous, 800 W peak power
Ideal for FOH, side fill and monitor applications
6.5″ low frequency driver with low mass voice coil for improved transient response
Neodymium 1″ HF compression driver
Rotatable converging elliptical waveguide provides 90 H x 60 V dispersion
1/2″ (12 mm) birch plywood enclosure with hard wearing semi matt black paint finish
Powder coated perforated steel grille foam backing
Multiple rigging points compatible with Turbosound and OmniMount brackets
What Turbo say about the TSB-110
The black TSB-110 10″ Bandpass Subwoofer from Turbosound is a compact sub-bass enclosure designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theaters, themed environments, and places of worship. It comprises a dual voice coil 10″ LF driver in a birch plywood enclosure consisting of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions.The TSB-110 provides sub-bass support for several Turbosound enclosures. It is essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit. Therefore, a single sub-bass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four color-coded spring-loaded push terminals.
The TSB-110 has been designed to fit into small spaces where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are provided to allow for permanent installations.
Bandpass subwoofer for installation applications
300W continuous, 1,200W peak power
High excursion 10″ low frequency driver
Low distortion dual port design for maximum sound pressure level
5/8″ birch plywood enclosure with hard wearing semi matt black paint finish
Integral M10 rigging points for ease of installation
Spring-loaded push terminal connectors
Designed and engineered in England
In the BoxTurbosound TSB-110 10″ Bandpass Subwoofer (Black)Limited 3-Year Warranty
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.