If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
1.2 Watt, 532nm Green DPSS Laser head and matched DPSSL PSU.
This is an extremely powerful DPSS Laser and Matched DPSSL Power supply specially designed for the event industry with an excellent and sharp 1,200mW Green 532nm beam, Analog and TTL Modulation.
These are perfect for building your own professional high quality laser projector at a fraction of the costs.This laser and power supply was bought for a project that was never started and therefore has only been fired up to test it and is still in its original foam shipping packaging.The laser output is comparable to laboratory lasers and the manufacturing quality is extremely high.The photos shows the laser free running indoors in normal ambient light!!! This laser cost in the region of 2000 when originally purchased. Specifications
Laser Power: 1,200mW
Optical frequency: 532nm
Colour: Green
Beam diameter: 2mm
Divergence 1.5mrad adjustable using a collimator down to 0.8mrad (not supplied).
Modulation type: Analog and TTL
Cooling: Heatsink + TEC (Thermo Electric Cooling – Air Cooled).
Expected lifetime: More than 10,000 hours.Head length: 195mm
Head width: 80mm
Head height: 80mm
Head weight: 1.7kgPower supply length: 178mm
Power supply width: 140mm
Power supply height: 95mm
Power supply weight: 1.7kgPower source 220VAC or 110VAC Switched mode PSU (automatic)Umbilical cable: 1000mm The laser can be operated in two modes:
1) Turn on the laser with a blanking signal and the laser will start instantly.
2) In order to turn on the laser without a blanking signal, unplug the blanking connector and the laser will gradually run up to full power in free running mode after approximately a 2 minute delay.The blanking signal is delivered by two wires red and black, in TTL mode the black is ground and the red the signal 0-5v.
In Analog mode the black is -V and red +V balanced line input.
What you get:
Laser head.
Umbilical cable.
Laser power supply.
Blanking connector.
Serious bidders only please. THIS ITEM IS NOT A TOY. Please feel free to ask any questions regarding this item.
I would prefer Collection only but can arrange insured shipping on request of a quote.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.