If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
SummarizationThe DMX-SPI decoder adopts the advanced micro control unit.It receives standard DMX-512 digital control signal that is widely used in the international and transformes it into SPI signal to drive LED, it supports 10 kinds of different model of lights.At the same time the port of DMX signal has lightning protection measures, you could connect the DMX decoder with DMX digital console to achieve dimming or various changes in procedures.Not connected with DMX console, you can choose select the built-in 35 kinds of default patterns through the mode button, the default points is 1024. ControllerWorking temperature: -20~60 CelsiusInput voltage: DC 5~24VOutput: SPI signal (DATA, CLK)External dimension: L175 x W53 x H27(mm)Packing size: L180 x W58 x H55(mm)Net weight: 257gGross weight: 293gMax output: 480W Parameters Settings of DecoderYou can modify the light type that decoder supports through the DIP switch.The decoder can support 10 kinds of SPI strips in market. As follows:NumberModelSignal line1LPD6803DATA, CLK2TM1803DATA3TM1809DATA4TM1812DATA5UCS1903DATA6WS2811DATA7WS2801DATA CLK8TLS3001DATA9TLS3008DATA10P9813DATA, CLKIf there are 2 signal lines, then you need to connect the ground wire, clock line, data line with GND CLK DATA; if it is 1 signal line, then just need to connect the ground wire, data line with GND DATA.Remark: if the V+ voltage of strip is the same with controller input voltage, then it can directly connect with the controller V+; if not, you need to connect another power supply.Since the specifications of light in the market are different, the sequence of RGB may be different, the sequence of some lights is RGB, some sequence is RBG, GRB and so on, so the DIP switch provides modification of RGB sequence. Mode changes are as the following table: ModeMode instruction1Static red2Static green3Static blue4Static yellow5Static purple6Static cyan7Static white8Red horse race to right9Green horse race to right10Blue horse race to right11Three base color stroboflash12Seven-color stroboflash13Three base color jumpy change14Seven-color jumpy change15Three mixing color three color wave by wave running forward direction16Seven-color wave forward direction17Red trail forward direction18Red trail backward direction19Green trail forward direction20Green trail backward direction21Blue trail forward direction22Blue trail backward direction23Seven-color running trail backward direction24Seven-color running trail forward direction25Change color purple-red-purple forward direction26Change color yellow-green-yellow forward direction27Change color cyan-green-cyan forward direction28Change color purple-blue-purple forward direction29Change color cyan-blue-cyan forward direction30Change color white-red-white forward direction31Change color yellow-red-yellow forward direction32Change color red-yellow-red33Change color green-cyan-green34Change color blue-purple-blue35Automatically play 8~34
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.