If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.
Very nice sounding PA speakers from JBL Professional PRX Range. Deep Warm Bass, Plywood Cabs, quailty bit of kit. These were used in the interim whilst my main FOH units were being serviced. Now no longer needed. Owned from new by me. Superb condition, used but not abused. Check out the pics for your piece of mind. This listing is for a pair of PA Speakers.
133 dB peak SPL10″ low-frequency driver for low-distortion and higher SPL1.5″ diameter next generation JBL neodymium compression driverJBL designed waveguide for accurate coverageEfficient Class-D amplifier technologyNormal and Boost user selectable EQ presetsDSP input section, crossover, dynamic limiting, component optimization, selectable system EQLine level and direct microphone input capabilityProfessional XLR-1/4″ combination inputs, RCA inputs, and XLR loop-throughIntegrated 36 mm pole mount socketIntegrated handle with injection molded backing cup for easy transportIntegrated M10 suspension points for easy setupLightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBLs tour proven DuraFlexfinish.Cloth backed, dent-resistant 16 gauge steel grilles The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub/sat system.The PRX710 is comprised of a 10″ woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100 by 60 horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBLs tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of1000 lbs. each.The amplifier input panel offers XLR or inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
Power Rating1500 WAC power input100V – 240V~ 50/60 HzFrequency Range (-10 dB)Normal: 50 Hz 19.6kHzBoost: 42.9 Hz 20kHzFrequency Response (3 dB)Normal: 63.5 Hz 18.5kHzBoost: 53 Hz 18.6kHzCoverage Pattern100 x 60 nominalDirectivity Index (DI)9 dBDirectivity Factor (Q)8Crossover Frequency1.9 kHzMaximum SPL133 dBSignal IndicatorsLimit: Yellow LED indicates peak output has been reached and dsp limiter is actingSignal: Green LED indicates signal presentPower/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.Dynamic Control (Input)dbx Type IV limiter circuitInput Impedance20K Ohms (balanced), 10K Ohms (unbalanced)LF Driver1 x JBL M110-4 250mm (10 in) wooferHF Driver1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driverEnclosureTrapezoidal, 18 mm, plywoodSuspension / Mountingsingle 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back pointTransport1 x integrated handle with injection molded backing cupFinishObsidian DuraFlex finishGrillePowder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.Input Connectors2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA inputOutput Connectors1 male XLR balanced outputDimensions (H x W x D)498.7 mm x 335.6 mm x 322.3 mm(19.63 in x 13.21 in x 12.69 in)Weight16.4 kg (36 lb)
UK Mainland sale only
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.