Peavey DPC1000 1kW Power Amplifier

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Peavey DPC1000 1kW Power Amplifier

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.

This auction is for 1 Peavey DPC1000 power amplifier. 
1000 W output power, only 1 rack space and 5.5 kg
That’s a lot of power for a relatively small unit!
In good working order, only minor scratches from racking.

SPECIFICATIONSFrequency Response                                                     Load Protection      +0, -1.5 dB 20 Hz to 20 kHz @                                          Short circuit current limit. Thermal overload.      1 W RMS into 4 ohms                                                     Turn on and turn off transient muting.Rated Power                                                                    Load Impedance      600 W RMS (1 channel driven) into 4 ohms                     4 ohms or greater (stereo), 8 ohms or greater      500 W RMS per channel (both channels driven)              (bridged mode).(Unconditionally stable into      into 4 ohms                                                                       any load configuration or any signal condition      1000 W RMS (Bridge mode mono) into 8 ohms.              and level at the input.)
To t a l Harmonic Distortion                                              Front Panel IndicatorsLess than .2 % @ 450 watts RMS per channel                        Signal LED dual function indicatorsinto 4 ohms                                                                           Status LED dual function indicatorsTransient Intermodulation Distortion                               Power ConsumptionHone present (0 % TIM)                                                          1200 watts, 120 V AC, 50/60 Hz (domestic)                                                                                           1200 watts, 240 V AC, 50/60 Hz (export)Output Slew RateThe amplifier output slew rate is internally controlled            Dimensionsto optimize phase linearity and improve transient                   19″ W x 1.75″ H x 14″ Dresponse. Due to the nature of the amplifier designand the internal signal conditioning circuitry, it                Weightcannot slew rate limit.                                                           12 lbs / 5.44 kgHum and NoiseGreater than 90 dB below full power(20 Hz to 20 kHz)Input Sensitivity1.0 V RMS for 500 watts into 4 ohms

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.