Kam LED Parbar MkIII DMX Lighting System + Controller + Bag + Stand + Manual

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Kam LED Parbar MkIII DMX Lighting System + Controller + Bag + Stand + Manual

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.

Kam LED Parbar MkIII DMX Lighting System + Controller + Bag + Stand + Manual. Condition is “Used”. 

 

 

The lighting unit, case and controller are in very good condition. The stand is damaged but fully functional: the securing clamp for the top extension pole is cracked, so the safety bolt has to be used to maintain the full height adjustment (see photo).

 

 

Weight: 13kg. Dimensions: 127x40x20 cm in case. Stand height up to 2.5m.

 

Sound to Light with built-in programsStand-alone operation for solo performanceFully 512 DMX compatible15xDMX channel operationT-bar incorporates built-in LED controllerXLR DMX in and out4-pedal foot controllerPadded rig bagSeparate stand for height up to 2.5m (securing clamp for extension pole is cracked, so must use safety bolt to secure maximum extension) 

 

Modes

 

1. Sound mode – outputs built-in programs from the parbar in time with the music. Activated via the built-in microphone and adjusted via the onboard sensitivity control.

 

2. Auto mode – Outputs built-in programs from the parbar at a set speed or delay. Activated and set via the onboard controller.

 

3. Manual mode – Control colour mixing, strobing and fade.

 

4. DMX 512 mode – Control each individual LED colour, brightness, strobe and chase via external controller (NOT Supplied). See manual for DMX channel data.

 

5. Obey3 – 3 simple sound patterns to select or 3 channel DMX mode ideal for RGB control.

 

6. Master/slave mode – Connect many units to one master to create a chain effect.

 

 

Auto mode: Has 12 patterns in this mode, AP01-AP12 and you can set the speed for each pattern chase.

 

 

Manual mode: For colour mixing you can set the intensity of the Red, Blue and Green. You can also set the strobe speed manually.

 

 

Sound mode: You can select the 4 sound modes, SP03 means RGB On/Off, SP02 means colour mixing changing, SP01 means RGB changing, and SP00 means 7-single colour changing.

 

 

Foot switch mode : You can connect the footswitch unit (in any working mode) after entering footswitch mode.

 

Footswitch “BLACKOUT”: Press the “BLACKOUT” pedal to turn off all LEDs in parbar lights and the LED Display will show OFF. Press “BLACKOUT” again to return to the last scene before turn off all LEDs.

 

Footswitch “HOLD”: Press the “HOLD” pedal to hold the data and display. The LED display will show ‘HOLD’ Press “HOLD” pedal again to return to the last scene before hold.

 

Footswitch “SOUNDON”: Press the “SOUNDON” pedal to enter sound mode and to select four different sound types. You can also press the “MENU” button and use the “Up” button to select the four different sound types using the main controller when the parbar is working in Foot switch mode .The LED display on parbar will show “Soun”

 

Press “SOUNDON” pedal to enter sound mode and to choose from four different sound modes. You can also select the four different sound kinds by pressing the ‘MENU’ button and using the ‘UP’ button to choose the sound kind.

 

 

On the main controller press the MENU button and use the up button to select the “SOUNDON” button on the foot controller to choose different patterns. The LED display on parbar will show “SOUN”

 

 

Footswitch “PRESET”: Press “PRESET” pedal to system reset The LED display on parbar will show “APON”

 

Now use the controller on the parbar, press “Menu” and “Up” to enter AUTO mode, “Color” choosing mode and

 

You can use “PRESET” of the footswitch to select RGB ->R->G->B->RG->GB->RB->RGB->APOI->AP02->AP03 (etc.) ->AP12->ALL (run all AP01-AP12 patterns one by one)

 

 

DMX control and channel details are in the included instruction manual.

 

 
 
 
 
 
 
 

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.