Showtec DMX 512 Merger – 1U Rack Mount [50359] DMX 512 Merger 3 pin XLR #1

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items, and to buy from eBay.

Showtec – DMX 512 Merger
1U Rack Mount

Stock Code: 50359

INFORMATION
The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk.

FEATURES
The unit has 4 modes:
1) HTP (Highest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX channel with the highest value has priority.

2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority.
Once channel A fails or has no DMX channel B takes over the show.

3) Merge mode. Two desks can be merged on one line. E.g. you can run a scene setter and DMX operator on one line. The Scene Setter will operate on channel 1-96 and the DMX Operator will have the channels 97 and higher.
These positions can be freely addressed by the dip-switches.

4) LTP (Latest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX input with the latest value change has priority.

SPECIFICATION
Power Requirement: DC 9V, 300 mA Min.
(AC/DC adapter included)
DMX Input: two 3-pin XLR male sockets on the front panel
Extra: two 3-pin XLR male sockets on the rear panel
DMX output: two 3-pin XLR female sockets on the front panel
Extra one 3-pin XLR female sockets on the rear panel
Dimensions: 483 x 73 x 45 mm (LxWxH)
Weight: 1,15 kg

Similar items: